Scalarworks LEAP Aimpoint PRO mount

LEAP/PRO

State of the art Aimpoint PRO mount.

Designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible.


ONE ZERO

Leap mounts hold and return to zero under any condition. Guaranteed.




Scalarworks LEAP Aimpoint PRO mount

Scalarworks LEAP Aimpoint PRO mount lightest weight

LIGHT MADE RIGHT

Engineered to be the lightest Aimpoint PRO QD mount, without compromising an ounce of strength.

Scalarworks® SW0210 (2.45oz)
46%
LaRue® LT150 (3.25oz)
61%
ADM® AD-68H (3.68oz)
70%
Bobro Engineering® B02-004-000 (4.95oz)
94%
Aimpoint® QRP2 (5.29oz)
100%

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint PRO in lower-third co-witness height.

MIGHTY MOUNT

The Leap is the strongest Aimpoint PRO Quick-Detach mount we've ever tested.

We put a variety of QD mounts on a digital test stand, capable of exerting up to 1500lbs of force, and analyzed load versus displacement data for each. We then used everything we learned from these tests to refine our original design, culminating in the Leap; a quick-detach mount that is both the lightest and strongest on the market today.


Scalarworks LEAP Aimpoint PRO mount clamp

A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.

Scalarworks LEAP Aimpoint PRO mount FEA

During it's development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting edge design process has resulted in the most efficient mount design possible.


Scalarworks LEAP Aimpoint PRO mount 7075-T6
Scalarworks LEAP Aimpoint PRO mount 7075-T6 vs 6061-T6

Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

The One Ring

The Scalarworks Ring was designed from the ground up to be stiffer, sleeker, and lighter than traditional rings.

Scalarworks Ring Cross Bolts

A precision fitted hinge ensures even pressure around your optic, without requiring the tedious and imprecise setup that traditional rings do.

Scalarworks Ring Cross Bolts

Twin oversize CNC machined shoulder screws provide even tension and act as structural elements, making the entire ring assembly phenomenally rigid.

Scalarworks Ring Cross Bolts

Each side of the Scalarworks Ring is carefully lightened with a curvature continuous scallop that produces a very high strength-to-weight ratio.

Scalarworks Ring Cross Bolts

The Scalarworks Ring is wider than competing designs, providing more surface area to safely and securely hold your optic.

Scalarworks LEAP Aimpoint PRO mount Low Profile

Smooth is Fast

The Leap has no protruding levers or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.

Scalarworks Leap Aimpoint PRO mount with ClickDrive quick-detach system

ClickDrive

Our patented ClickDrive quick-detach mechanism is intuitive, self adjusting, and completely recoil proof. By decoupling clamping force from vibration resistance, ClickDrive doesn't need massive amounts of imprecise torque, and is not dependent on unreliable friction. A low profile recessed thumbwheel deflects external impacts, while letting you take the mount off in under 3 seconds, with or without gloves.

Generations

The Leap mount is the most deliberate evolution of our original design.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 1

From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC milled base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 2

In 2015, the second generation Low Drag Mount became the first Quick-Detach mount ever to be CNC milled from 7075-T6. It's external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 3

Today, the Leap mount features an ever stronger base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.


BUNDLE UP

Worry-free, properly torqued and threadlocked, optic bundles.


LEAP/PRO

Rated 5.00 out of 5 based on 9 customer ratings
9 customer reviews

$199.00$499.00


Scalarworks Shop Perks
Clear
5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Write your own review.

Your email address will not be published. Required fields are marked *

  1. Rated 5 out of 5

    Kevin Ross (verified owner)

    Verified reviewVerified review - view originalExternal link

    Best PRO mount I have ever seen or used and I’ve used just about all of them

    Was this review helpful to you?
  2. Rated 5 out of 5

    Taylor Stevens (verified owner)

    Verified reviewVerified review - view originalExternal link

    Customer for life, all the mounts I’ve purchased from scalarworks are top notch

    Was this review helpful to you?
  3. Rated 5 out of 5

    Ross (verified owner)

    I’ve been shooting for 43 years, 25 professionally. I teach and train numerous civilian, LE, Swat and military egos. I’ve tried every high quality mount made and I can say I’ve never seen anything with the strength , quality and attention to detail like these mounts. I have switched all of my mounts to Scalarworks mounts. My PRO’s, micros, MRO’s and RMR’s. They are the best and you won’t be disappointed guaranteed!

    Was this review helpful to you?
  4. Rated 5 out of 5

    Eric (verified owner)

    Verified reviewVerified review - view originalExternal link

    Solid light weight mount, QD system locks up tight, easy to use, and stays put.

    Was this review helpful to you?
  5. Rated 5 out of 5

    Thomas (verified owner)

    Got my mount and it is the quality product I expected. Before I even received the product in the mail I received an email to let me know the correct tourqe specs. Called Scalarworks and had informative discussion on how to properly torque with out an inch pound wrech of course this only really matters if you are using a knock off product. Installed my ACO and hit the range to zero thanks for the great product. Buy with confidence

    1 out of 1 people found this helpful. Was this review helpful to you?