LEAP/02
$219.00 – $599.00

Designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible.
Engineered to be the lightest Aimpoint PRO QD mount, without compromising an ounce of strength.
All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint PRO in lower-third co-witness height.
We put a variety of QD mounts on a digital test stand, capable of exerting up to 1500lbs of force, and analyzed load versus displacement data for each. We then used everything we learned from these tests to refine our original design, culminating in the Leap; a quick-detach mount that is both the lightest and strongest on the market today.
A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.
During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting edge design process has resulted in the most efficient mount design possible.
Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.
The Scalarworks Ring was designed from the ground up to be stiffer, sleeker, and lighter than traditional rings.
A precision fitted hinge ensures even pressure around your optic, without requiring the tedious and imprecise setup that traditional rings do.
Twin oversize CNC machined shoulder screws provide even tension and act as structural elements, making the entire ring assembly phenomenally rigid.
Each side of the Scalarworks Ring is carefully lightened with a curvature continuous scallop that produces a very high strength-to-weight ratio.
The Scalarworks Ring is wider than competing designs, providing more surface area to safely and securely hold your optic.
The Leap has no protruding levers or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
Our patented ClickDrive™ quick-detach mechanism is intuitive, self adjusting, and completely recoil proof. By decoupling clamping force from vibration resistance, ClickDrive™ doesn't need massive amounts of imprecise torque, and is not dependent on unreliable friction. A low profile recessed thumbwheel deflects external impacts, while letting you take the mount off in under 3 seconds, with or without gloves.
From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive™ Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC milled base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.
In 2015, the second generation Low Drag Mount became the first Quick-Detach mount ever to be CNC milled from 7075-T6. Its external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.
Today, the Leap mount features an ever stronger base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.
$219.00 – $599.00
Domingo V. (verified owner) –
Rock solid mount. Lightweight. I purchased the Aimpoint pro bundle but upon closer examination, I noticed that the Aimpoint was canted. At this price you would expect the Aimpoint to be properly mounted and centered. All in all I’m very impressed with the quality of the mount.
Scalarworks (store manager) –
Sorry to hear that. Please contact tech support and they’ll issue you a pre-paid return label so that we can straighten it for you.