Scalarworks LEAP Aimpoint PRO mount

LEAP/02

State of the art Aimpoint PRO mounts.

Designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible.


ONE ZERO

Leap mounts hold and return to zero under any condition. Guaranteed.




Scalarworks LEAP Aimpoint PRO mount

Scalarworks LEAP Aimpoint PRO mount lightest weight

LIGHT MADE RIGHT

Engineered to be the lightest Aimpoint PRO QD mount, without compromising an ounce of strength.

Scalarworks® SW0210 (68grams)
45%
LaRue® LT150 (92grams)
61%
ADM® AD-68H (104grams)
70%
Aimpoint® QRP2 (150grams)
100%

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint PRO in lower-third co-witness height.

MIGHTY MOUNT

The Leap is the strongest Aimpoint PRO Quick-Detach mount we've ever tested.

We put a variety of QD mounts on a digital test stand, capable of exerting up to 1500lbs of force, and analyzed load versus displacement data for each. We then used everything we learned from these tests to refine our original design, culminating in the Leap; a quick-detach mount that is both the lightest and strongest on the market today.


Scalarworks LEAP Aimpoint PRO mount clamp

A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.

Scalarworks LEAP Aimpoint PRO mount FEA

During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting edge design process has resulted in the most efficient mount design possible.


Scalarworks LEAP Aimpoint PRO mount 7075-T6
Scalarworks Leap Aimpoint PRO mount 7075-T6 vs 6061-T6

Every Leap mount is CNC milled from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

Mk2 Ring

Twice as many knuckles and double the material thickness as the original.

Scalarworks Mk2 Ring low profile

Won't get in your way of viewing or manipulating your optics' adjustment turrets.

Scalarworks ViseRing hinged

Eliminates the uncertain and tedious setup required by traditional split rings.

Scalarworks LEAP Aimpoint PRO mount Low Profile

Smooth is Fast

The Leap has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.

Scalarworks Leap Scope mount ClickDrive quick-detach system

ClickDrive®

The world's most efficient quick-detach.

A fluted crown requires only the torque from your bare hand to securely clamp the mount onto a rail, and uses the force from a spring-loaded ball-detent to make it completely recoil proof. Return-to-zero is guaranteed as long as the same person takes it on and off.

Evolved

The Leap mount is the most deliberate evolution of our original design.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 1

From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC milled base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 2

In 2015, the second generation Low Drag Mount became the first Quick-Detach mount ever to be CNC milled from 7075-T6. Its external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 3

Today, the Leap mount features an even stronger base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.


BUNDLE UP

Worry-free, properly torqued and threadlocked, optic bundles.


LEAP/02

(65 customer reviews)

FREE SHIPPING | EASY RETURNS

This product is currently out of stock and unavailable.

SPECS
Choose a Configuration Above.
COMPATIBILITY
Choose a Configuration Above.
INCLUDED
Choose a Configuration Above.

65 reviews for LEAP/02

5.0
Based on 64 reviews
5 star
98
98%
4 star
1
1%
3 star
0%
2 star
0%
1 star
0%
  1. Anonymous (verified owner)

    Great mount for my Aimpoint pro. Super solid.

    (0) (0)
  2. Anthony (verified owner)

    Awesome product. Light weight and functions like a dream.

    (0) (0)
  3. Oliver Kasianchuk (verified owner)

    Way better than ADM!

    (0) (0)
  4. Anonymous (verified owner)

    Came pre tightened and perfect with the mount, the throwins were greatly appreciated, and it runs flawlessly. Absolutely worth the price

    (0) (0)
  5. Anthony Medina IV (verified owner)

    LEAP/02 – 1.57″ Standalone Mount

    Ordering through the website was very user friendly and easy. UPS was used as the carrier and delivery was expedient and on time. Packaging was immaculate and vacuum sealed. Product feels very well built. Easy to install and I’m about to go full ham and purchase the LEAP/06 Aimpoint 3X-C Bundle (1.57″) since it’s now back in stock.

    (1) (0)
Add a review

Your email address will not be published. Required fields are marked *