LEAP/01
$159.00

1143 reviews for LEAP/01
5 star | 98% | |
4 star | 1% | |
3 star | 0% | |
2 star | 0% | |
1 star | 0% |
Only logged in customers who have purchased this product may leave a review.
The lightest, strongest, and most compact quick-detach red dot sight mount available. LEAP/01 redefines the standard for mounting your Aimpoint Micro T-2 footprint compatible optic to your AR-15's Picatinny top rail. Available in 1.42”, 1.57”, and 1.93” optic height.
All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint Micro T-2 in lower-third co-witness height.
We benchmarked all of the top quick-detach mounts on a digital test stand capable of exerting up to 1500lbs of force. We then used this data to refine our Aimpoint Micro T-2 mount design, culminating in the LEAP; a quick-detach mount that is both the lightest and strongest on the market today.
A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.
During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting-edge design process has resulted in the most efficient mount design possible.
The LEAP mount lets you shoot at your very best by eliminating snag hazards and putting nothing in the way of weapon manipulations. With its industry leading ClickDrive quick-detach mechanism, the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail.
SPECIFICATIONS
Materials
7075-T6 Aluminum / 4140H Steel
Finishes
Type III Anodizing / Flash Nitride
Optic center height over rail
SW0100 : 1.42"
SW0110 : 1.57"
SW0120 : 1.93"
Co-Witness
SW0100 : Absolute
SW0110 : Lower-Third
SW0120 : Only with 1.93" PEAK/02
Weight
SW0100 : 43g (1.52oz)
SW0110 : 45g (1.58oz)
SW0120 : 51g (1.80oz)
Origin
United States of America
COMPATIBILITY
Rails
MIL-STD-1913 Picatinny
B&T rifles
APC and SPC only
Aimpoint red dot sights
Micro T-2, H-2, T-1, H-1, CompM5
Holosun red dot sights
403, 503, 515, 530
Primary Arms red dot sights
Advanced Micro Dot, Microdot
Sig Sauer red dot sights
ROMEO4 (H/S/T), ROMEO5
Vortex red dot sights
CROSSFIRE®, SPARC® II, SPARC® SOLAR
IN THE BOX
Mount
Scalarworks® LEAP™
Fasteners
Tools
Manual
$159.00
5 star | 98% | |
4 star | 1% | |
3 star | 0% | |
2 star | 0% | |
1 star | 0% |
Only logged in customers who have purchased this product may leave a review.
Aaron D Haddox –
This product comes well recommended in the firearms community but it needs some improvements and some warnings. I went with this mount (1.47”) due to it being the highest rated see through mount which was a necessity for my build, H&K SP5K. H&K drum sights sit really low and a see through mount is the only way to mount an optic and keep the ability to use the irons. Mount seems well made but it will not fit on B&T low picatinny rail or any low picatinny rail for that matter without some serious effort. The effort amounted to about 30 minutes of careful Dremel grinding to cut out a crescent notch in the B&T rail for the thumb screw to fit and turn. That said, it would be nice if Scalorworks would have the option of a smaller thumb screw or just a smaller torx head bolt for mounting in tight areas. Also, a torx bit head in the center of the thumb screw would have really helped for leverage as well. If you don’t wrench down on that thumb screw until your knuckles turn white, the mount will wiggle. All in all, it’s on there now and I will live with it out of pure necessity.
Scalarworks (store manager) –
We’re working on a MP5 rail that is fully Mil-Std-1913 compliant and won’t require deremeling like many of the B&T rails do. Stay tuned!
Jason (verified owner) –
I wish i had gotten 1/3RD or taller, but design is amazing.