LEAP/01
State of the art Aimpoint Micro T-2 mounts.
Designed for shooters who want the lightest, strongest, and most compact quick-detach red dot sight mount possible. The LEAP/01 redefines the standard for mounting your Aimpoint Micro T-2 footprint compatible optic to your AR-15's Picatinny top rail. Available in 1.42”, 1.57”, and 1.93” optic heights.
LIGHT MADE RIGHT
Engineered to be the lightest Aimpoint Micro T-2 QD mount, without compromising an ounce of strength.
The LEAP/01 is precision CNC machined from all six sides out of a single piece of 7075-T6 Aluminum billet to ensure the ideal strength-to-weight ratio.
Scalarworks® SW0410 (47grams)
LaRue® LT660 (80grams)
Aimpoint® LRP (85grams)
ADM® AD-T1-11 (95grams)
Bobro Engineering® B13-111-003 (110grams)
All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint Micro T-2 in lower-third co-witness height.
MIGHTY MOUNT
The Leap is the strongest Aimpoint Micro T-2 Quick-Detach mount we've ever tested.
We tested a variety of quick-detach mounts on a digital test stand capable of exerting up to 1500lbs of force. We then used this data to refine our original Aimpoint Micro T-2 mount design, culminating in the LEAP; a quick-detach mount that is both the lightest and strongest on the market today.
A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.
During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting-edge design process has resulted in the most efficient mount design possible.
Every Leap mount is CNC machined from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.
SMOOTH IS FAST
Quick-Detach with no protruding levers or knobs.
The LEAP mount lets you shoot at your very best by eliminating snag hazards and putting nothing in the way of weapon manipulations. With its industry leading ClickDrive quick-detach mechanism, the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail.
ClickDrive®
The world's most efficient quick-detach.
ClickDrive is a tool-free quick-detach system that self-adjusts to any MIL-STD-1913 Picatinny rail, making it a breeze to move your optic from rifle to rifle. Its low-profile thumbscrew and low-friction telescoping clamp require only the torque from your bare hand to securely attach the mount onto a rail. An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof. Since ClickDrive is a timed system, return-to-Zero is guaranteed as long as the same person takes it on and off.EVOLVED
The Leap mount is the most deliberate evolution of our original design.
From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive® Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC machined base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.
In 2015, the second-generation Low Drag Mount became the first Quick-Detach mount ever to be CNC machined from 7075-T6. Its external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.
Today, the Leap mount features our strongest base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.
Anonymous (verified owner) –
Quality is excellent. Ratcheting finger screw makes installation very fast and easy. Seems to hold tight. Only reason for not giving the full 5 stars is that I wish they had an option for a higher height. 1.93″ is good, but a slightly taller option (similar to the tall Unity height) would be nice. Overall, mount is fantastic.
Matthew B. (verified owner) –
The mount is beautifully machined and functions incredibly. It was packaged great, shipped fast, and the ability to buy the optic and the mount as a kit is very convenient. My only wish is that the original packaging for the optic was included.
Scalarworks (store manager) –
Hi, Matthew.
Thanks for the kind review. Our T-2 sights arrive to us in plain white boxes direct from Aimpoint. You’re not misisng anything there. We do however ship Trijicon products in their plastic reusable cases, and scopes in their original retail boxes.
Keaton (verified owner) –
The look and robustness are fantastic. I am a big fan of the ease of installation. The only thing I am concerned about is that it is loose on my GHM9. I tightened it as tight as I could with my hand and it still wobbles in every direction. I have not taken it to the range yet but we will see if it continues to retain zero.
Daniel C. (verified owner) –
This is the SEXIEST red dot mount on the market! The QC of this product appears to be OUTSTANDING! But as far as the durability goes, like with any product only time will tell. GREAT JOB SCALARWORKS TEAM!
Dustin (verified owner) –
Fast friendly service. Product is great. Bought the combo. Would have given five stars but I wish they made 2.25″ riser. That rise would fit me better….