LEAP/01
State of the art Aimpoint Micro T-2 mounts.
Designed for shooters who want the lightest, strongest, and most compact quick-detach red dot sight mount possible. The LEAP/01 redefines the standard for mounting your Aimpoint Micro T-2 footprint compatible optic to your AR-15's Picatinny top rail. Available in 1.42”, 1.57”, and 1.93” optic heights.
ONE ZERO
Leap mounts hold and return to zero under any condition. Guaranteed.
LIGHT MADE RIGHT
Engineered to be the lightest Aimpoint Micro T-2 QD mount, without compromising an ounce of strength.
The LEAP/01 is precision CNC machined from all six sides out of a single piece of 7075-T6 Aluminum billet to ensure the ideal strength-to-weight ratio.
Scalarworks® SW0410 (47grams)
LaRue® LT660 (80grams)
Aimpoint® LRP (85grams)
ADM® AD-T1-11 (95grams)
Bobro Engineering® B13-111-003 (110grams)
All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint Micro T-2 in lower-third co-witness height.
MIGHTY MOUNT
The Leap is the strongest Aimpoint Micro T-2 Quick-Detach mount we've ever tested.
We tested a variety of quick-detach mounts on a digital test stand capable of exerting up to 1500lbs of force. We then used this data to refine our original Aimpoint Micro T-2 mount design, culminating in the LEAP; a quick-detach mount that is both the lightest and strongest on the market today.
A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.
During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting-edge design process has resulted in the most efficient mount design possible.
Every Leap mount is CNC machined from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.
SMOOTH IS FAST
Quick-Detach with no protruding levers or knobs.
The LEAP mount lets you shoot at your very best by eliminating snag hazards and putting nothing in the way of weapon manipulations. With its industry leading ClickDrive quick-detach mechanism, the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail.
ClickDrive®
The world's most efficient quick-detach.
ClickDrive is a tool-free quick-detach system that self-adjusts to any MIL-STD-1913 Picatinny rail, making it a breeze to move your optic from rifle to rifle. Its low-profile thumbscrew and low-friction telescoping clamp require only the torque from your bare hand to securely attach the mount onto a rail. An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof. Since ClickDrive is a timed system, return-to-Zero is guaranteed as long as the same person takes it on and off.
EVOLVED
The Leap mount is the most deliberate evolution of our original design.
From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive® Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC machined base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.
In 2015, the second-generation Low Drag Mount became the first Quick-Detach mount ever to be CNC machined from 7075-T6. Its external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.
Today, the Leap mount features our strongest base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.
Bradley J. (verified owner) –
So I have a few of Scalarworks products. I have two Leap01’s, one at 1.93 and one at 1.57. I also have the Leap08 1.93 and some folding Peak’s at 1.93. They ALL perform flawlessly. I’m super impressed by Scalarworks build quality and ingenuity, these things are solid at the same time being light enough to not weigh down the rifle. I used to run Unity stuff but I like these way better. They all were super easy to install and the leveling screw in the Leap08 had my LVPO leveled in five minutes. I highly recommend these mounts, if you are reading these reviews trying to decide if you want one or not, stop delaying and buy one right now. You will not be disappointed. I’ve already recommended them to everyone in the various classes and training I’ve been in these past few months. Just do it!
Anonymous (verified owner) –
Perfect height for aimpoint t2 on the sp5/mp5 platform. Be sure to team this mount up with the MFI ultra low mount from hkparts (or something as low). Unobstructed iron’s view through the scalarworks mount, nice unobstructed “above the front site” red dot.
This combo works with HK sp5 9mm and HK mp5 .22lr (umerex). There, saved you all the research. Quality
Edgar Llanos (verified owner) –
Awesome Mount!
Izac L. (verified owner) –
Wonderful service, Exceptional product! I Recommend.
Kevin C. (verified owner) –
Can’t go wrong with this combo. Scalarworks mounts are so light and so robust, I don’t think I can ever use anything else but!