Scalarworks LEAP Aimpoint Micro T-2 mount

LEAP/01

State of the art Aimpoint Micro T-2 mounts.

The lightest, strongest, and most compact quick-detach red dot sight mount available. LEAP/01 redefines the standard for mounting your Aimpoint Micro T-2 footprint compatible optic to your AR-15's Picatinny top rail. Available in 1.42”, 1.57”, and 1.93” optic height.

ONE ZERO

Leap mounts hold and return to zero under any condition. Guaranteed.



Scalarworks LEAP Aimpoint Micro T-2 mount lightest weight

FIGHT LIGHT

Engineered to be the lightest Aimpoint Micro T-2 QD mount, without compromising an ounce of strength.

Scalarworks® SW0110 (47grams)
43%
LaRue® LT660 (80grams)
73%
Aimpoint® LRP (85grams)
77%
ADM® AD-T1-11 (95grams)
86%
Bobro Engineering® B13-111-003 (110grams)
100%

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint Micro T-2 in lower-third co-witness height.

ROCK SOLID

The Leap is the strongest Aimpoint Micro T-2 Quick-Detach mount we've ever tested.

We benchmarked all of the top quick-detach mounts on a digital test stand capable of exerting up to 1500lbs of force. We then used this data to refine our Aimpoint Micro T-2 mount design, culminating in the LEAP; a quick-detach mount that is both the lightest and strongest on the market today.

Scalarworks LEAP Aimpoint Micro T-2 mount clamp

A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.

Scalarworks LEAP Aimpoint Micro T-2 mount FEA

During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting-edge design process has resulted in the most efficient mount design possible.

Scalarworks LEAP Aimpoint Micro T-2 mount Low Profile

SMOOTH IS FAST

Quick-Detach with no protruding levers or knobs.

The LEAP mount lets you shoot at your very best by eliminating snag hazards and putting nothing in the way of weapon manipulations. With its industry leading ClickDrive quick-detach mechanism, the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail.

Scalarworks Leap Scope mount ClickDrive quick-detach system

ClickDrive®

The world's most efficient quick-detach.

ClickDrive's low-profile thumbscrew and low-friction telescoping clamp require only the torque from your bare hand to securely attach onto a rail. An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof.

  • SPECIFICATIONS

  • Materials

    7075-T6 Aluminum / 4140H Steel

  • Finishes

    Type III Anodizing / Flash Nitride

  • Optic center height over rail

    SW0100 : 1.42"

    SW0110 : 1.57"

    SW0120 : 1.93"

  • Co-Witness

    SW0100 : Absolute

    SW0110 : Lower-Third

    SW0120 : Only with 1.93" PEAK/02

  • Weight

    SW0100 : 43g (1.52oz)

    SW0110 : 45g (1.58oz)

    SW0120 : 51g (1.80oz)

  • Origin

    United States of America

  • COMPATIBILITY

  • Rails

    MIL-STD-1913 Picatinny

  • B&T rifles

    APC and SPC only

  • Aimpoint red dot sights

    Micro T-2, H-2, T-1, H-1, CompM5

  • Holosun red dot sights

    403, 503, 515, 530

  • Primary Arms red dot sights

    Advanced Micro Dot, Microdot

  • Sig Sauer red dot sights

    ROMEO4 (H/S/T), ROMEO5

  • Vortex red dot sights

    CROSSFIRE®, SPARC® II, SPARC® SOLAR

LEAP/01

(1145 customer reviews)

$159.00

FREE SHIPPING | EASY RETURNS

Clear
1.42"
1.57"
1.93"

Not sure what height?

Explore what height is right for you.

What height is right for you?

Choose 1.42″ height if:

  • You value a tight cheek weld in all shooting positions.
  • You want an absolute co-witness with backup sights.
  • You don’t shoot with a top-rail mounted light or laser.

Choose 1.57″ height if:

  • You value a good cheek weld in all shooting positions.
  • You want a lower-third co-witness with backup sights.
  • You shoot with a top-rail mounted light or laser.

Choose 1.93″ height if:

  • You value a more relaxed heads-up shooting style.
  • You are willing to upgrade to 1.93″ PEAK/02 BUIS.
  • You shoot with a top-rail mounted light or laser.

Have Questions?

Contact our support team
Standalone Mount

What’s in a Bundle

See how we build our bundles.


BUNDLE UP

Scalarworks Optic Bundles are professionally assembled and inspected at our factory in Easton, PA. Optics are sourced directly from the manufacturer and function tested prior to assembly.

Have Questions?

Contact our support team
SKU: SW01XX

Reviews

  1. Eric B. (verified owner) –

    Fantastic Product! Very impressed with the craftsmanship, the overall quality, and how lite the mount/bundle truly is. Aimpoint and Scalarworks are a match made in heaven! Well done!

    (1) (0)

  2. Philip Winnington (verified owner) –

    Amazing product sold at a great price. Was able to get the T2 with the 1.93 configuration and I love it. Shipping was incredibly fast and the product looks like it could stand up to anything you can throw at it.

    (0) (0)

  3. Daniel Earwood (verified owner) –

    Awesome product

    (0) (0)

  4. Jeremy Wallace (verified owner) –

    Amazing, I had to buy two.

    (0) (0)

  5. Anonymous (verified owner) –

    I’m in love

    (0) (0)

Only logged in customers who have purchased this product may leave a review.