Scalarworks LEAP Aimpoint ACRO P-2 mount

LEAP/03

State of the art Aimpoint ACRO P-2 mounts.

Designed for shooters who want the lightest, strongest, and most compact quick-detach red dot sight mount possible. The LEAP/03 redefines the standard for mounting your Aimpoint ACRO P-2 footprint compatible optic to your AR-15's Picatinny top rail. Available in 1.57”, and 1.93” optic heights.


ONE ZERO

Leap mounts hold and return to zero under any condition. Guaranteed.





Scalarworks LEAP Aimpoint ACRO P-2 mount lightest weight

LIGHT MADE RIGHT

Engineered to be the lightest Aimpoint ACRO P-2 QD mount, without compromising an ounce of strength.

The LEAP/03 is precision CNC machined from all six sides out of a single piece of 7075-T6 Aluminum billet to ensure the ideal strength-to-weight ratio.

Scalarworks® SW0310 (44grams)
65%
Reptilia® 100-026 (56grams)
84%
B&T® QD NAR (67grams)
100%

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint ACRO P-2 in lower-third co-witness height.

MIGHTY MOUNT

The Leap is the strongest Aimpoint ACRO P-2 Quick-Detach mount we've ever tested.

We tested a variety of quick-detach mounts on a digital test stand capable of exerting up to 1500lbs of force. We then used this data to refine our original Aimpoint ACRO P-2 mount design, culminating in the LEAP; a quick-detach mount that is both the lightest and strongest on the market today.


Scalarworks LEAP Aimpoint ACRO P-2 mount clamp

A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.

Scalarworks LEAP Aimpoint ACRO P-2 mount FEA

During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting-edge design process has resulted in the most efficient mount design possible.


Scalarworks Leap scope mount 7075-T6
Scalarworks Leap Aimpoint ACRO P-2 mount 7075-T6 vs 6061-T6

Every Leap mount is CNC machined from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

Scalarworks LEAP Aimpoint ACRO P-2 mount Low Profile

SMOOTH IS FAST

Quick-Detach with no protruding levers or knobs.

The LEAP mount lets you shoot at your very best by eliminating snag hazards and putting nothing in the way of weapon manipulations. With its industry leading ClickDrive quick-detach mechanism, the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail.

Scalarworks ClickDrive quick-detach system

ClickDrive®

The world's most efficient quick-detach.

ClickDrive is a tool-free quick-detach system that self-adjusts to any MIL-STD-1913 Picatinny rail, making it a breeze to move your optic from rifle to rifle. Its low-profile thumbscrew and low-friction telescoping clamp require only the torque from your bare hand to securely attach the mount onto a rail. An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof. Since ClickDrive is a timed system, return-to-Zero is guaranteed as long as the same person takes it on and off.

EVOLVED

The Leap mount is the most deliberate evolution of our original design.

Scalarworks Leap Aimpoint ACRO P-2 Mount generation 1

From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive® Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC machined base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.

Scalarworks Leap Aimpoint ACRO P-2 Mount generation 2

In 2015, the second-generation Low Drag Mount became the first Quick-Detach mount ever to be CNC machined from 7075-T6. Its external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.

Scalarworks Leap Aimpoint ACRO P-2 Mount generation 3

Today, the Leap mount features our strongest base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.


BUNDLE UP

Professionally assembled at our factory in Easton, PA. All of our optics are sourced directly from the manufacturer. Our expert optics technicians visually inspect and function test every optic. Bundles are assembled using high precision torque drivers to the optic manufacturer’s specifications.


LEAP/03

(70 customer reviews)

$159.00$699.00

FREE SHIPPING | EASY RETURNS
Clear
SKU: SW03XX
SPECS
Choose a Configuration Above.
COMPATIBILITY
Choose a Configuration Above.
INCLUDED
Choose a Configuration Above.

70 reviews for LEAP/03

5.0
Based on 70 reviews
5 star
95
95%
4 star
4
4%
3 star
0%
2 star
0%
1 star
0%
  1. Ryan (verified owner)

    Purchased for a MPS on a Dissent and could not be more ecstatic! Perfect height and easy install. Customer service was super prompt!

    (0) (0)
  2. Justin B. (verified owner)

    I’m always happy with scalarworks if it’s not there mount it’s not going on my guns excited to see some of there new optic/mounts coming this summer and fall !!!!! Can’t go wrong here !!!!

    (0) (0)
  3. Alec T. (verified owner)

    It’s awesome. Stays on sturdy and holds zero great.

    (1) (0)
  4. Kevin C. (verified owner)

    These mounts never fail to impress me with the attention to detail and their beauty.

    (1) (0)
  5. Eric Samuli

    Just recieved my Scalarworks Leap/03 for the Aimpoint ACRO. I opted to go with the 1.57″ mount. I am extremely impressed with the quick delivery, packaging, quality of mount, and how good this setup, with the Aimpont ACRO, looks on the B&T APC9K weapon platform.

    You will not be disappointed if you decide to add the Leap to you sub-gun setup. Spend the money and buy quality once.

    (1) (0)
Add a review

Your email address will not be published. Required fields are marked *