Scalarworks LEAP Trijicon RMR mount

LEAP/04

State of the art Trijicon RMR mounts.

Designed for shooters who want the lightest, strongest, and most compact quick-detach red dot sight mount possible. The LEAP/04 redefines the standard for mounting your Trijicon RMR footprint compatible optic to your AR-15's Picatinny top rail. Available in 1.57” and 1.93” optic heights.


ONE ZERO

Leap mounts hold and return to zero under any condition. Guaranteed.





Scalarworks LEAP Trijicon RMR mount lightest weight

LIGHT MADE RIGHT

Engineered to be the lightest Trijicon RMR QD mount, without compromising an ounce of strength.

The LEAP/04 is precision CNC machined from all six sides out of a single piece of 7075-T6 Aluminum billet to ensure the ideal strength-to-weight ratio.

Scalarworks™ Leap™ SW0410 (47grams)
47%
Larue® LT827 (68grams)
69%
American Defense Mfg™ AD-RMR-SOCOM (99grams)
100%

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Trijicon RM06 in lower-third co-witness height.

MIGHTY MOUNT

The Leap is the strongest Trijicon RMR Quick-Detach mount we've ever tested.

We tested a variety of quick-detach mounts on a digital test stand capable of exerting up to 1500lbs of force. We then used this data to refine our original Trijicon RMR mount design, culminating in the LEAP; a quick-detach mount that is both the lightest and strongest on the market today.


Scalarworks LEAP Trijicon RMR mount clamp

A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.

Scalarworks LEAP Trijicon RMR mount FEA

During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting-edge design process has resulted in the most efficient mount design possible.


Scalarworks Leap scope mount 7075-T6
Scalarworks Leap Trijicon RMR mount 7075-T6 vs 6061-T6

Every Leap mount is CNC machined from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

Scalarworks LEAP Trijicon RMR mount Low Profile

SMOOTH IS FAST

Quick-Detach with no protruding levers or knobs.

The LEAP mount lets you shoot at your very best by eliminating snag hazards and putting nothing in the way of weapon manipulations. With its industry leading ClickDrive quick-detach mechanism, the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail.

Scalarworks Leap Scope mount ClickDrive quick-detach system

ClickDrive®

The world's most efficient quick-detach.

ClickDrive is a tool-free quick-detach system that self-adjusts to any MIL-STD-1913 Picatinny rail, making it a breeze to move your optic from rifle to rifle. Its low-profile thumbscrew and low-friction telescoping clamp require only the torque from your bare hand to securely attach the mount onto a rail. An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof. Since ClickDrive is a timed system, return-to-Zero is guaranteed as long as the same person takes it on and off.

EVOLVED

The Leap mount is the most deliberate evolution of our original design.

Scalarworks Leap Trijicon RMR Mount generation 1

From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive® Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC machined base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.

Scalarworks Leap Trijicon RMR Mount generation 2

In 2015, the second-generation Low Drag Mount became the first Quick-Detach mount ever to be CNC machined from 7075-T6. Its external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.

Scalarworks Leap Trijicon RMR Mount generation 3

Today, the Leap mount features our strongest base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.


BUNDLE UP

Professionally assembled at our factory in Easton, PA. All of our optics are sourced directly from the manufacturer. Our expert optics technicians visually inspect and function test every optic. uirBundles are assembled using high precision torque drivers to the optic manufacturer’s specifications.


LEAP/04

(186 customer reviews)

$159.00$589.00

FREE SHIPPING | EASY RETURNS
Clear
SKU: SW04XX
SPECS
Choose a Configuration Above.
COMPATIBILITY
Choose a Configuration Above.
INCLUDED
Choose a Configuration Above.

186 reviews for LEAP/04

5.0
Based on 186 reviews
  1. Matt (verified owner)

    I bought this mount and it saved my life. One night my friend and I were drinking (not Bud Light) and I decided to install this mount. While I was tinkering with around, my friend decided to grab my crossbow and stuck a carbon fiber broadhead hunting bolt in it. We were probably on out 10th beer(not BudLight) when one of the screws I was trying to install fell out, and just as I bent over to pick it up I heard the bolt release and felt the disturbance in the air as the bolt when past my head at Mach-Jesus. If it wasn’t for this mount I’d surely be shoulder mounted on a wall somewhere next to the 8 pointer he got last fall.
    Hashtag FeelingBlessed

    (0) (3)
  2. Michael (verified owner)

    Put my sro and a jagerwerks shield on the leap/04.Such a light and durable option.Changed my setup so much with the weight.Very quick.

    (0) (0)
  3. Todd Ritz (verified owner)

    Very happy with the exceptionally high quality of this, and all my other Scalarworks mounts!

    (0) (0)
  4. Stepan Y. (verified owner)

    Fantastic product.

    (0) (0)
  5. Erik (verified owner)

    Great product!

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *