Scalarworks LEAP Trijicon MRO mount


State of the art Trijicon MRO mounts.

Designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible.


Leap mounts hold and return to zero under any condition. Guaranteed.

Scalarworks LEAP Trijicon MRO mount lightest weight


Engineered to be the lightest Trijicon MRO QD mount, without compromising an ounce of strength.

Scalarworks™ SW0510 (43grams)
Larue® LT849 (57grams)
American Defense Mfg™ AD-MRO-SOCOM (68grams)
Bobro Engineering™ B19-555-003 (90grams)

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Trijicon MRO in lower-third co-witness height.


The Leap is the strongest Trijicon MRO Quick-Detach mount we've ever tested.

We put a variety of QD mounts on a digital test stand, capable of exerting up to 1500lbs of force, and analyzed load versus displacement data for each. We then used everything we learned from these tests to refine our original design, culminating in the Leap; a quick-detach mount that is both the lightest and strongest on the market today.

Scalarworks LEAP Trijicon MRO mount clamp

A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.

Scalarworks LEAP Trijicon MRO mount FEA

During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting edge design process has resulted in the most efficient mount design possible.

Scalarworks LEAP Trijicon MRO mount 7075-T6
Scalarworks LEAP Trijicon MRO mount 7075-T6 vs 6061-T6

Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

Scalarworks LEAP Trijicon MRO mount Low Profile


The Leap has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.

Scalarworks Leap Scope mount ClickDrive quick-detach system


The world's most efficient quick-detach.

A fluted crown requires only the torque from your bare hand to securely clamp the mount onto a rail, and uses the force from a spring-loaded ball-detent to make it completely recoil proof. Return-to-zero is guaranteed as long as the same person takes it on and off.


The Leap mount is the most deliberate evolution of our original design.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 1

From its introduction in 2014, the original Low Drag Mount featured our recoil proof ClickDrive® Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC milled base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 2

In 2015, the second generation Low Drag Mount became the first Quick-Detach mount ever to be CNC milled from 7075-T6. Its external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 3

Today, the Leap mount features an even stronger base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.


Worry-free, factory built optic bundles.


(424 customer reviews)


Choose a Configuration Above.
Choose a Configuration Above.
Choose a Configuration Above.

424 reviews for LEAP/05

Add a review

Your email address will not be published. Required fields are marked *

  1. benny11b (verified owner)


    Recently made a purchase for the MRO bundle and I must say I am extremely satisfied. I’m a recently separated veteran and they gave me the active military/LEO discount anyway. Doesn’t get much better than this. HIGHLY RECOMMEND!

    (2) (0)
  2. Elliott (verified owner)

    I purchased the MRO Bundle Lower-Third to go on my Christensen Arms V-Tac 15. Wow what at perfect combination. Looks outstanding and most important very light. The Customer Service at SCALARWORKS is the best in the industry.
    Here is why… They sent me a MRO Bundle that had a factory flaw in the a anadizing from Trijicon. With no questions asked they sent me a return label to my email within minutes and another MRO Bundle was sent for delivery.
    Thank you, Elliott V.

    (0) (0)
  3. Chris

    Awesome combo, couldn’t be happier with it! Top notch!

    (0) (0)
  4. Dan Wallace (verified owner)

    My order was for co-witness and I wish I had bought the 1/3 as they had suggested. The mounts and MRO are perfect and as advertised you can take them off and re-mount with a perfect Zero. My students love the streamline look and how lightweight these mounts are. You cannot go wrong with these mounts.

    (1) (0)
  5. Nick

    This mount is a great product. High speed. I only wish I had found this bundle on your website before I had ordered my MRO elsewhere…. awesome price, especially considering the free, 3-day shipping. Live and learn I guess. Thanks guys.

    (3) (1)