Scalarworks LEAP Magnifier mount


State of the art Flip-to-Side Magnifier mounts.

Designed for shooters who want the lightest, strongest, and most compact quick-detach magnifier mount possible.


Superior weapon balance.
Faster magnifier engagement.

Scalarworks LEAP Magnifier mount lightest weight


Engineered to be the lightest Magnifier QD mount, without compromising an ounce of strength.

Scalarworks® SW0610 (2.97oz)
Aimpoint® 200250 (4.38oz)
LaRue® LT775 (4.38oz)

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint 3X-C in lower-third height.

Scalarworks Leap scope mount 7075-T6
Scalarworks Leap scope mount 7075-T6 vs 6061-T6

Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

Scalarworks LEAP Magnifier mount positive

Flippin' Awesome

Opposing 4mm ball detents acting against Black Nitrided Chromoly steel plates provide ultra positive locking for thousands of cycles.

The One Ring

The Scalarworks® Ring was designed from the ground up to be stiffer, lighter, and easier to use than split rings.

Scalarworks Ring Cross Bolts

A high-strength, precision fitted hinge ensures even pressure around your optic, without requiring the tedious and imprecise setup that split rings do.

Scalarworks Ring Cross Bolts

Twin oversize CNC machined shoulder screws provide even tension and act as structural elements, making the entire ring assembly phenomenally rigid.

Scalarworks Ring Cross Bolts

Each side of the Scalarworks® Ring is carefully lightened with a curvature continuous scallop that produces a very high strength-to-weight ratio.

Scalarworks Ring Cross Bolts

The Scalarworks® Ring is wider than competing designs, providing more surface area to safely and securely hold your optic.

Scalarworks LEAP Magnifier mount ClickDrive Quick-Detach system


Our patented ClickDrive quick-detach mechanism is intuitive, self adjusting, and completely recoil proof. By decoupling clamping force from vibration resistance, ClickDrive doesn't need massive amounts of imprecise torque, and is not dependent on unreliable friction. A low profile recessed thumbwheel deflects external impacts, while letting you take the mount off in under 3 seconds, with or without gloves.

Scalarworks LEAP Magnifier mount Low Profile

Smooth is Fast

The Leap has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.


(97 customer reviews)


Scalarworks Shop Perks
Choose a Configuration Above.
Choose a Configuration Above.
Choose a Configuration Above.

97 reviews for LEAP/06

Based on 97 reviews
Add a review

Your email address will not be published.

  1. Juan G. (verified owner)

    Verified reviewVerified review - view originalExternal link

    Top notch quality fit and finish the detent lock is solid and locks up perfect installed on a Aimpoint 6x magnifier

    (0) (0)
  2. Thomas (verified owner)

    Verified reviewVerified review - view originalExternal link

    Amazing. So light, such solid. Wow. Perfect balance between retention and flipping ease. Standoff in open position is enough that you can rotate your gun 45° and do a quick scan through it. Yet it hugs the gun to where balance shift isn’t noticeable. KAC Micro rear BUIS fits nicely under the 3X-C. The “One” ring mounting system for the magnifier is convenient: 25 in-lb torque on two screws and done. Weight: 10.25oz with magnifier, plus another 4.5 for a Micro T2 with its LEAP mount. I prefer this setup over an LPVO due to constant-on illumination, true 1x with big eye box, and can remove the mag when I want to lighten up. There’s no wiggle in closed or open position, which is important if you use two-eyes-open shooting with magnifier closed like you do with an ACOG. Wiggle would otherwise throw off your POA/POI. On the magnifier you can align the dot position to work with that method. Overall, can’t think of any improvements to this mount. It’s perfect.

    (2) (0)
  3. James M. (verified owner)

    Verified reviewVerified review - view originalExternal link

    Quality and construction are exceptional. Should last longer than the weapon.

    (1) (0)
  4. Curtis (verified owner)

    Verified reviewVerified review - view originalExternal link

    Amazing product from a badass company… give it 4 thumbs up!

    (0) (0)
  5. Jon N. (verified owner)

    Verified reviewVerified review - view originalExternal link

    I have been anxiously awaiting the release of this mount and I could not be happier. The fit and finish is typical Scalarworks and the flip to side mechanism is excellent. Now if I could just get one in the 1.93 height.

    (0) (0)