LEAP/13
$159.00 – $979.00
SPECS
Choose a Configuration Above.COMPATIBILITY
Choose a Configuration Above.INCLUDED
Choose a Configuration Above.27 reviews for LEAP/13
| 5 star | 96% | |
| 4 star | 3% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
LEAP/13
State of the art Aimpoint CompM4s mounts.
The lightest, strongest, and most compact quick-detach red dot sight mount possible. The LEAP/13 redefines the standard for mounting your Aimpoint CompM4s footprint compatible optic to your AR-15's Picatinny top rail. Available in both 1.57” and 1.93” optic heights.
ONE ZERO
Leap mounts hold and return to zero under any condition. Guaranteed.
LIGHT MADE RIGHT
Engineered to be the lightest Aimpoint CompM4s QD mount, without compromising an ounce of strength.
The LEAP/13 is precision CNC machined from all six sides out of a single piece of 7075-T6 Aluminum billet to ensure the ideal strength-to-weight ratio.
Scalarworks® SW1510 (45grams)
American Defense® AD-CM4-11-TL (68grams)
Aimpoint® QRP2 (100grams)
All Trademarks are the property of their respective owners and used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with hardware necessary to attach an Aimpoint CompM4s in lower-third co-witness height.
ROCK SOLID
The Leap is the strongest Aimpoint CompM4s Quick-Detach mount we've ever tested.
We tested a variety of quick-detach mounts on a digital test stand capable of exerting up to 1500lbs of force. We then used this data to refine our original optic mount design, culminating in the LEAP; a quick-detach mount that is both the lightest and strongest on the market today.
A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.
During its development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting-edge design process has resulted in the most efficient mount design possible.
Every Leap mount is CNC machined from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.
SMOOTH IS FAST
Quick-Detach with no protruding levers or knobs.
The LEAP mount lets you shoot at your very best by eliminating snag hazards and putting nothing in the way of weapon manipulations. With its industry leading ClickDrive quick-detach mechanism, the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail.
ClickDrive®
The world's most efficient quick-detach.
ClickDrive's low-profile thumbscrew and low-friction telescoping clamp require only the torque from your bare hand to securely attach onto a rail. An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof. 
BUNDLE UP
Professionally assembled at our factory in Easton, PA. All of our optics are sourced directly from the manufacturer. Our expert optics technicians visually inspect and function test every optic. Bundles are assembled using high precision torque drivers to the optic manufacturer’s specifications.
SPECIFICATIONS
Materials
7075-T6 Aluminum / 4140H Steel
Finishes
Type III Anodizing / Flash Nitride
Optic center height over rail
SW1510 : 1.57"
SW1520 : 1.93"
Co-Witness
SW1510 : Lower-Third
SW1520 : Only with 1.93" PEAK/02
Weight
SW1510 : 45g (1.59oz)
SW0120 : 49g (1.73oz)
Origin
United States of America
COMPATIBILITY
Rails
MIL-STD-1913 Picatinny
B&T rifles
APC and SPC only
Aimpoint reflex sights
CompM4, CompM4s, PRO Ring
IN THE BOX
Mount
Scalarworks® LEAP™
Fasteners
M5x6mm Nylon patched
Tools
Manual
Patrick (verified owner) –
Great optic and mount combo, I use it on my patrol rifle at work.
Ryan (verified owner) –
I bought the Leap/13 mount for an Aimpoint Pro. It is less than half the weight of stock and was within 2 clicks wind-age of being zeroed from the previous mount. I really like the minimalist design while still having a “welded to the frame” feel.