Scalarworks LEAP Aimpoint Micro T-2 mount

LEAP/MICRO

State of the art Aimpoint Micro T-2 mount.

Designed for shooters who want the lightest, strongest, and least obtrusive quick-detach optic mount possible.


ONE ZERO

The Leap Mount returns to zero on every re-installation, and holds zero under the heaviest recoil. Guaranteed.





Scalarworks LEAP Aimpoint Micro T-2 mount lightest weight

LIGHT MADE RIGHT

Engineered to be the lightest Aimpoint Micro T-2 QD mount, without compromising an ounce of strength.

Scalarworks® SW0110 (1.65oz)
43%
LaRue® LT660 (2.82oz)
73%
Aimpoint® LRP (2.99oz)
77%
ADM® AD-T1-11 (3.34oz)
86%
Bobro Engineering® B13-111-003 (3.88oz)
100%

All Trademarks are the property of their respective owners and are used in accordance with FTC Comparative Advertising guidelines. All mounts weighed under the same conditions with all hardware necessary to attach an Aimpoint Micro T-2 in lower-third co-witness height.

MIGHTY MOUNT

The Leap is the strongest Aimpoint Micro T-2 Quick-Detach mount we've ever tested.

We put a variety of QD mounts on a digital test stand, capable of exerting up to 1500lbs of force, and analyzed load versus displacement data for each. We then used everything we learned from these tests to refine our original design, culminating in the Leap; a quick-detach mount that is both the lightest and strongest on the market today.


Scalarworks LEAP Aimpoint Micro T-2 mount clamp

A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.

Scalarworks LEAP Aimpoint Micro T-2 mount FEA

During it's development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting edge design process has resulted in the most efficient mount design possible.


Scalarworks LEAP Aimpoint Micro T-2 mount 7075-T6
Scalarworks LEAP Aimpoint Micro T-2 mount 7075-T6 vs 6061-T6

Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

Scalarworks LEAP Aimpoint Micro T-2 mount Low Profile

Smooth is Fast

Narrower than most bolt-on mounts: the Leap has no protruding levers or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.

Scalarworks LEAP Aimpoint Micro T-2 mount Quantum Quick-Detach system

Quantum

Quick-Detach Mechanism

The Scalarworks® Quantum Quick-Detach mechanism is completely recoil proof, while requiring only enough torque to firmly clamp onto a Picatinny rail. By decoupling torque from vibration resistance, the Quantum QD mechanism is intuitive, fast, and self adjusting, all without needing an imprecise knob or obtrusive lever to keep it from shaking loose. The Quantum QD's recessed head is carefully designed to deflect external impacts, while letting you take the mount off in under 3 seconds, with or without gloves.

Generations

The Leap mount is the most deliberate evolution of our original Low Drag Mount design.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 1

From it's introduction in 2014, the original Low Drag Mount featured our recoil proof Quantum Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC milled base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 2

In 2015, the second generation Low Drag Mount became the first Quick-Detach mount ever to be CNC milled from 7075-T6. It's external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.

Scalarworks Leap Aimpoint Micro T-2 Mount generation 3

Today, the Leap mount features a re-engineered base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.

LEAP/MICRO

$149.00

Clear
SKU: SW01XX Category: Tags: , , , , , ,